4 Easy steps to install your vinyl lettering
Everyday, we ship vinyl lettering all over Australia to printing companies, graphic designers, marketing and event companies, trade show graphics shop fitting and display companies. Let us show you the signage savings you can make online in Australia.
| Format: |
5-7 year Vinyl lettering. Suitable for
boats, vehicles, sign boards and General Signage. |
| 1 |
1. CLEAN AND DE-GREASE your signage surface. |
| |
The vinyl lettering supplied will match the
proof supplied to you exactly. Each line of lettering will
have a pencil mark showing you the centre point, left or right
point for your reference. This will make it easy to align multi
lines of lettering / text / logo etc. Vinyl lettering made easy. |
| 2 |
MEASURE the position of the line from either
the top or the bottom of the sign, the section on the vehicle,
banner etc. Use a light hand when marking the lines.
|
| 3 |
TURN THE LETTERING OVER, (Lettering Down) showing the back
side of the silicone paper, this will make removing the line
easier for you. Put the lettering onto your line by peeling back
the silicone backing. This will leave the lettering upside down.
Using a Household spray bottle, apply a light mist over the
lettering.
We have an Application KIT available with a plastic squeegee tool.
The lettering is sticky. Applying a light mist over the adhesive
will allow you to re-position any necessary movement. Hold the
line at each end, turn over and place onto your pencil marked
line.
WHEN IN POSITION APPLY FIRM PRESSURE TO THE LETTERING USING OUR PLASTIC
APPLICATOR KIT, CREDIT CARD OR OTHER FLAT SQUEEGEE TOOL, WORKING
FROM THE CENTRE, UP AND DOWN, SQUEEZING OUT ANY
AIR OR WATER.
|
| 4 |
RUB THE LETTERING ONTO THE SIGN. Once you
have pressured the lettering onto the sign, remove the top
covering tape from left to right at a slight angle, LEAVING THE
LETTERING BEHIND IN PERFECT POSITION.
|
|
Adelaide 